Technological Process Of Sheet Metal Parts

Apr 15, 2019

Leave a message

Sheet metal parts generally uses materials such as cold rolled (SPCC), hot rolled (SHCC), galvanized sheets (SECC,SGCC), copper (CU) brass, red copper, beryllium copper, aluminum plates (6061, 5052, 1010, 1060, 6063, hard aluminum, etc.), stainless steel (mirror, wire drawing, fog surface), stainless steel (mirror surface, drawing surface, fog surface), aluminum plate (6061, 5052, 1010, 1060, 6063), stainless steel (mirror, wire drawing, fog), Depending on the role of the product, the selection of materials is different, generally from the use and cost of the product to consider.

 

1. Cold rolled sheet SPCC, is mainly used for electroplated and enamelled parts, low cost, easy to form, material thickness ≤ 3.2 mm.

2. Hot rolled SHCC, material T ≥ 3.0mm is also used to electroplate, paint parts, low cost, but difficult to form, mainly using flat plate parts.

3. Galvanized sheet SECC,SGCC.SECC electrolytic plate divided into N material, P material, N material mainly without surface treatment, high cost, P material used for spraying parts.

4. Copper; mainly used as conductive material, its surface treatment is nickel, chromium plating, or no treatment, the cost is high.

5. Aluminium sheet; commonly used surface chromate (J11 A), oxidation (conductive oxidation, chemical oxidation), high cost, silver plating, nickel plating.

6. Aluminum profiles; materials with complex cross-section structures, used in a large number of plug-ins. Surface treatment with aluminum plate.

7. Stainless steel; mainly without any surface treatment, high cost.

 

If you want to know more about cnc fast prototyping with abs material. please email below.

steven@smilecnc-china.com (our sales manager)

Send Inquiry