The Difference Between CNC Machining Center And Milling Machine

Apr 15, 2019

Leave a message

1, is the CNC machining center good or the engraving and milling machine good?

CNC machining center and engraving and milling machine are more commonly used mechanical equipment, they also have similarities and differences, it is difficult to have an accurate answer if it is hard to say whether the CNC machining center is good or good engraving and milling. There is no way to compare different uses. There are only a few small ways to compare the advantages and disadvantages of the two.

2. Is the rigidity of the CNC machining center better or the engraving and milling machine better?

CNC machining center non-moving part rigidity requirement is very good, moving part rigidity is also very good, can carry on the heavy cutting. The non-moving part of the engraving and milling machine has good rigidity, and the moving part is less rigid than the CNC machining center because of the flexible requirements of the engraving and milling machine.

3, is the spindle speed CNC machining center fast or engraving and milling machine fast

The spindle rotation speed of CNC machining center is generally 0 / 8000rpm. Although the high-speed machining center can achieve very high rotational speed, on the whole, the engraving and milling machine requires higher rotational speed, and the engraving and milling machine requires high-speed numerical control system. The spindle speed is usually 3000 m 300 000 rpm, and the spindle speed of some specific engraving and milling machines is higher than that of the high speed machining center.

4, the processing range of CNC machining center and engraving and milling machine is different.

CNC machining center is used to complete the machining of large milling volume of workpiece, can be re-cut. The engraving and milling machine is generally used for small cutting capacity or soft metal processing equipment, commonly used for engraving.

In general, there is no distinction between high and low, such as not using engraving and milling machines in heavy cutting and no use of machining centers in fine engraving. We can only say that both of these have their own characteristics and fields of action, and if they are hard to compare, they will not be able to use engraving and milling machines in the course of heavy cutting. No tough comparisons can be made.

 

If you want to know more about cnc plastic prototype creator and plastic prototype with best quality. please email below.

steven@smilecnc-china.com (our sales manager)

Send Inquiry