What Is A Boring Made By CNC?

Apr 12, 2019

Leave a message

What is the cnc machine hole? CNC machining hole is to enlarge or refine the original hole on the work piece. CNC machining is characterized in that the eccentric of the lower hole is corrected, the position of the precise hole is obtained, and the roundness, the cylindricity and the surface finish of the high-precision are obtained. Therefore, the holes are often used in the final process.

 

Compared with other machining, CNC boring is a kind of difficult machining. It only adjusts a blade (or blade seat) to process micrometer-class holes such as H7, H6.

 

What are the features of boring with CNC?

 

1, tool rotation

Cnc milling and lathe processing is different, machining center because of tool rotation, it is impossible to grasp the tip of the tool in the processing in time to adjust the amount of the tool, and so on. It is also impossible to change the machining diameter just by adjusting the NC press and twist as the NC lathe does. This has become a complete automation of the processing of a very large obstacle. It is also because the machining center does not have the automatic processing diameter adjustment function (except with the U axis function), the boring tool must have the fine-tuning mechanism or the automatic compensation function, Especially in the fine boring according to the tolerance requirements sometimes must be in the micron level adjustment.

 

In addition, the direction of chip flow is constantly changing when boring in machining center, so the tip of cutter, the cooling of workpiece and the discharge of chip are much more difficult than lathe processing. Especially when using vertical machining center to rough boring the blind hole of steel, this problem has not been completely solved up to now.

2, bullet knife

The most common and most troubling problem with boring is the elastic knife. The main reasons for the occurrence of bullet knives in machining centers are as follows

 

(1)Rigidity of tool system: the rigidity of tool shank, boring bar, boring head and middle connecting part. Because it is cantilever machining, especially for small hole, deep hole and hard workpiece, the rigidity of tool is very important.

(2)Dynamic balance of tool system: relative to the rotating axis of the tool system, the tool itself has an unbalanced mass, which is caused by the action of the unbalanced centrifugal force during rotation, which leads to the occurrence of flutter. Especially in high-speed machining, the dynamic balance of the tool has a great impact.

(3)The fixed rigidity of the workpiece itself or of the workpiece: for example, some smaller, thinner parts cannot be adequately fixed with a reasonable fixture because of their lack of rigidity or because of the shape of the workpiece.

(4)Blade tip shape: blade front angle, escape angle, tip radius, chip break groove shape of different cutting resistance is also different

 

 

cnc aluminum casting foundry

 

If you want to know more about cnc turning aluminum prototype and aluminum cnc milling prototype . please email below.

steven@smilecnc-china.com (our sales manager)

Send Inquiry