How To Learn CNC Processing Well? It Takes Only Six Steps To Become An Expert In Programming CNC Machine Tools (one Of Them)

Apr 04, 2019

Leave a message

cnc rapid prototype buliders


In the CNC home, if the aluminum part is processed, to maintain the stability of the dimension, the factors that we need to consider are the following two categories:

First, irresistible factors:

1. Machine tool's own stability. The machine tool is not completely new or the machine tool has a large number of machining and no debugging, and the dimensional deviation of the machine tool's own causes may occur. and the deviation factor of the machine tool also has the following points:

Mechanical: a. Loose between servo motor and screw; b. Ball screw bearing or nut wear. c. Insufficient lubrication between screw and nut. Electrical: a. Servo motor failure. b. There is dirt inside the grating ruler. c. Servo amplifier failure.


pom pp pe best prototype companies


Hot expansion and cold shrinkage deformation of workpiece. The hot expansion and shrinkage deformation of the workpiece after machining is unavoidable, so we should pay attention to the cooling effect, increase the frequency measured in the machine, and pay attention to the deformation condition of the workpiece after cooling.


II. Avoidable factors:

The machining process is to control the processing error, which is based on the reasonable processing technology. In the process of making the process, in principle, in addition to ensuring the basic processing technology (such as the "first, rough, first, posterior, first, posterior," or the basic processing process details of the "Reduce the number of clamping, and use the combined clamp as much as possible." or the fixture in the use of the jig), It is also important to minimize the processing error caused by the aluminum scrap to the aluminum part, and we all know that the aluminum part is soft, and the rejected scrap is very easy to make the aluminum part produce the machining error.


cnc prototype machining of plastic prototype


2. Cutting three elements: cutting speed vc, feed f, cutting depth ap and tool compensation in this respect, simply speaking, is in the premise of ensuring tool wear and machining quality, the adjustment of cutting parameters, The cutting performance of the cutting tool can be brought into full play, so that the cutting efficiency is the highest and the machining cost is the lowest. In numerical control lathe, there are some factors, such as tool wear compensation, which need to be considered.

3. The numerical calculation of manual programming is very common in manual programming, although it is almost automatic programming now, if we encounter manual programming, we should pay more attention to it.


prototype cnc machining with PEI


4. The knife is accurate.

If the tool alignment is not accurate, it will also cause size error. Therefore, the edge seeker should choose better as far as possible. Under the condition, it is better to equip the machine tool with laser tool-setting instrument to ensure the accuracy of the tool alignment. If there is no edge seeker, and there are no conditions, only the simplest trial cutting method!



If you want to know more about create pc plastic prototypes and abs plastic rapid prototype with best quality. please email below.

steven@smilecnc-china.com (our sales manager)

Send Inquiry