The processing method of cnc workpiece surface depends first on the technical requirements of the machined surface. However, it should be noted that these technical requirements are not necessarily those specified in part drawings, and sometimes they may be higher in some respects than those on part drawings for technological reasons. For example, due to the non-coincidence of the reference, the processing requirements for some cnc workpiece surfaces are improved. Or as a result of being used as a precision standard, higher processing requirements may be put forward.
When the technical requirements of the surface of each cnc workpiece are defined, the final machining method which can guarantee the requirement can be selected accordingly, and the machining methods that require several steps and each step can be determined. The selected cnc machining method should meet the requirements of parts quality, good machining economy and high production efficiency. To this end, the following factors should be taken into account in the selection of processing methods:
1. The machining accuracy and surface roughness obtained by any cnc machining method have a very large range, but only in a narrow range is economic, the machining accuracy in this range is economic machining precision. Therefore, when selecting the machining method, we should choose the corresponding machining method which can obtain the economic machining precision.
2. The properties of cnc workpiece materials should be considered.
3. The structure, shape and size of cnc workpiece should be considered.
4. Productivity and economic requirements should be considered. In mass production, high-efficiency advanced technology should be adopted. Even can fundamentally change the manufacturing method of blanks, can reduce the amount of mechanical processing labor.
5. The existing equipment and technical conditions of the factory or workshop should be considered. When choosing the processing method, we should make full use of the existing equipment, tap the potential of the enterprise, and bring the enthusiasm and creativity of the workers into full play. However, we should also consider improving the existing processing methods and equipment, adopting new technology and improving the technological level.
If you want to know more about 5 axis cnc aluminum parts with best quality and high precision aluminum prototype cnc machining . please email below.
steven@smilecnc-china.com (our sales manager)

