SST 303 304 Prototype By CNC Milling

SST 303 304 Prototype By CNC Milling
Details:
we are one of the best factories of Stainless Steel Metal Prototype Process
Process Material: Stainless Steel 303,304,Carbon Steel,Mould Steel
Process Methods: CNC Machining,CNC Milling,CNC Turning
Surface Finish: Smooth,Polish
Precisioin: +/-0.02mm
With Best Qaulity,Best Service,Resonable Price,Fastest Delivery time.
Send Inquiry
Description
Send Inquiry


We are one of the best factories of SST 303 304 prototype by cnc milling in shenzhen,china.


The follow picture is our cnc machining process processing.


5 Axis CNC Machining Processing 




Sst 303 304 prototype by cnc milling


 








We are one of the best factories of plastic CNC rapid prototype, aluminum CNC Machining,CNC Milling,CNC Turning, SLA SLS 3D printing services, RIM, silicone mold vacuum casting, sheet metal parts process and injection mould process in Shenzhen,China

 

please contact us

Steven Song(The Sales Manager)

Email: steven@smilecnc-china.com


 

You will get a quotation within 2-3 hours after we receive your inquiry at work days.

Look forward to your Join.



Knowledge: Causes and Solutions of tool bumping in CNC Machining Center 2

 

Three:Misoperation in the process of processing

(1)In the normal processing process of the program, the program is stopped because of the wrong operation. If the wrong operator starts the cycle immediately after the reset of "RESET", it is easy to hit the knife at this time.

 

Reason: the running default value changes with the set value of the program. According to the RESET: reset, the CNC system is reset to the initial state, which clears the prediction program information stored in the DRAM, and may also change the tool movement instruction.

 

G90 absolute instruction: run according to the coordinate value of the instruction.

The G91 incremental value instruction is executed according to the distance of movement of the instruction.

 

Avoid: if there is a mistake in the process of running the program to cause the program to stop running, modify to edit mode at this time, reset the program according to RESET, re-run the program, even if the program is converted from MDI to MEM, Be sure to check the various modal codes. (G M S F T, etc.) the disease is confirmed to be accurate and then start the automatic loop, otherwise there may be serious consequences.

 

(2) there is also a mistake in setting the tool complement value.

 

If the tool complement value is set incorrectly, it can also cause the impact of the knife. Check the correct value of the knife complement regularly to avoid the impact of the knife accident.

In fact, there are many reasons for the impact of the cnc turning center, but the possibility of system hardware failure is very low. As long as the management is strengthened, the misoperation is reduced, the tool complement value and the setting of the coordinate system of the workpiece are checked regularly, the origin point is confirmed before the machining, and all aspects of the inspection are done well, most of the impingement accidents can actually be avoided.

Hot Tags: sst 303 304 prototype by cnc milling, China sst 303 304 prototype by cnc milling suppliers, manufacturers, factory, Stainless Steel 303 304 Prototypes, Stainless Steel Prtototype, High Precision CNC Stainless Steel Machining Parts, SST 303 304 Prototype By CNC Milling, High Precision Stainless Steel Prototype, Stainless Steel 303 304 CNC Machining Prototypes

Send Inquiry