1. It is beneficial to guarantee the quality of processing. After rough machining, the cutting force and clamping force of the workpiece are larger because of the larger machining allowance, which will lead to larger deformation and redistribution of internal stress. If coarse, fine stage processing, the above-mentioned deformation too late to recover, will affect the processing accuracy. After dividing the processing stage, it can gradually restore and correct the deformation and improve the processing quality.
2. It is convenient to use the equipment reasonably. Rough machining requires a machine tool with good rigidity, high efficiency and low precision. After dividing the processing stage, it can avoid using lean and coarse, give full play to the performance of machine tool and prolong the service life of machine tool.
3, easy to arrange heat treatment process and inspection procedure. For example, after rough processing, heat treatment should be arranged to eliminate internal stress. Some parts need to be quenched before finishing, and their deformation can be eliminated by finishing.
4, easy to find defects and avoid damage to the machined surface. After rough processing, the defects are exposed and can be detected and treated in time. At the same time, the finishing process at the end can avoid damage to the machined surface during handling and clamping.

If you want to know more about cnc rapid prototype builders and car parts rapid prototype for exhibition. please email below.
steven@smilecnc-china.com (our sales manager)

