What Speed Should Be Used For Milling Stainless Steel?

Nov 09, 2024

Leave a message

news-408-408

1, Basic Overview of Stainless Steel Milling Speed
Stainless steel is an alloy steel with high strength, corrosion resistance, and toughness, widely used in industries, construction, medical devices, and other fields. Due to its unique physical and chemical properties, stainless steel generates high cutting temperatures and forces during milling. Therefore, choosing the appropriate milling speed is of great significance for ensuring machining quality, improving machining efficiency, and extending tool life.
Milling speed refers to the speed at which the tool moves on the workpiece, usually expressed as the distance the tool moves per minute (m/min). When milling stainless steel, the selection of speed needs to comprehensively consider various factors, including the material characteristics of stainless steel, the material and structure of the cutting tool, the setting of cutting parameters, and the requirements of the machined surface.
2, Factors affecting the selection of milling speed
The material properties of stainless steel include hardness, toughness, and thermal conductivity, which are important factors affecting milling speed. For example, stainless steel with higher hardness requires lower milling speeds to reduce tool wear and cutting heat generation.
The material and structure of the cutting tool: The material and structure of the cutting tool have a decisive impact on the selection of milling speed. Hard alloy cutting tools have high hardness and wear resistance, making them suitable for high-speed milling; High speed steel cutting tools have good toughness and heat resistance, but their cutting speed is relatively low. In addition, the geometric shape of the tool (such as rake angle, rake angle, helix angle, etc.) can also affect the cutting speed and cutting effect.
The setting of cutting parameters: Cutting parameters include cutting speed, feed rate, and cutting depth, etc. The setting of these parameters has a direct impact on milling speed and machining quality. Reasonable cutting parameter settings can improve machining efficiency, reduce tool wear, and ensure machining quality.
Requirements for machined surfaces: Different milling speeds and cutting parameters are required for different machined surfaces. For example, for machined surfaces that require low surface roughness, lower milling speeds and smaller feed rates are required; For higher processing efficiency requirements, milling speed and feed rate can be appropriately increased.
3, Selection strategy of speed during milling stainless steel
Milling speed of hard alloy cutting tools: Hard alloy cutting tools have high hardness and wear resistance, and are suitable for high-speed milling of stainless steel. When milling stainless steel with hard alloy cutting tools, the recommended milling speed is usually between 40-60m/min. At the same time, in order to ensure cutting efficiency and tool life, the feed rate should be greater than 0.1mm to avoid the occurrence of hardened layer edges and accelerate tool wear.
Milling speed of high-speed steel cutting tools: High speed steel cutting tools have good toughness and heat resistance, but the cutting speed is relatively low. When milling stainless steel with high-speed steel cutting tools, the recommended cutting speed is usually between 840m/min, and the feed rate is between 0.0130.15mm/z. It should be noted that it is best not to use high-speed steel end mills when working with hardened stainless steel, as hardened stainless steel has a higher hardness and can accelerate tool wear.
Milling speed of coated hard alloy cutting tools: Coated hard alloy cutting tools are coated with a layer of wear-resistant, heat-resistant, and lubricating coating material on the surface of hard alloy cutting tools to improve their cutting performance and service life. When using coated hard alloy cutting tools for stainless steel milling, the milling machine speed can be increased by about 50%, thereby improving machining efficiency.
Optimization of milling parameters: In addition to selecting appropriate milling speeds, it is also necessary to optimize cutting parameters to improve machining quality and efficiency. For example, different feed rates can be selected based on the hardness of the stainless steel material; Adjust the cutting depth and cutting speed according to the requirements of the machined surface.
The use of cutting coolant: In the process of milling stainless steel, the use of cutting coolant is also crucial. Cutting coolant can reduce cutting temperature, decrease cutting force and tool wear, and improve the quality of machined surfaces. However, it should be noted that when using hard alloy cutting tools to process stainless steel, do not use water-soluble cutting fluids to avoid excessive thermal stress and chipping on the cutting edge.
4, Practical case of speed selection in milling stainless steel
In the actual machining process, the choice of milling speed may vary depending on the type of stainless steel material and the machining requirements. Here is a practical case:
A certain enterprise needs to use a milling machine to process a batch of stainless steel parts, which are made of 304 stainless steel with moderate hardness. According to the machining requirements and equipment conditions of the parts, a hard alloy end mill was selected for machining. In order to ensure processing quality and efficiency, the cutting parameters were optimized: the milling machine speed was set to 50m/min, the feed rate was set to 0.15mm/r, and the cutting depth was set to 2mm. Meanwhile, use cutting coolant for cooling and lubrication. After practical processing verification, the cutting parameter settings are reasonable and effective, resulting in low surface roughness, high dimensional accuracy, and long tool life of the machined parts.
 

Send Inquiry