The prototype model is a model that has been completed and used to check the product to be designed, to see if the produced model is reasonable, to find out the defects and the rationality, and to make the prototype model to improve the R & D capability of the department and the appearance of the new product. The feasibility of the structure is tested, and the development of the prototype model is a work for the maturity of R & D, because the production cycle is short, the cost is low, and the cost, the time and the risk of product development are greatly saved. The prototype model is the first model to be made according to the design drawings. It is mainly used for inspection. It is not the real product to be designed. It is only a kind of sample, which can be used as the basis to find out the defects and the problems. At the beginning of the design, the problem is found to be unreasonable according to the prototype model. And the performance test of the product in the research and development process is met, and the competitiveness of the new product is effectively improved.
Many people want to know what positions are required for the production of prototype models, and what responsibilities are assumed. First, the drawings are drawn by the structure, the project team discusses the plan, the person in charge confirms and sends them to the prototype group for processing, and the two-dimensional drawings need to be followed up with a single document. 3-D documents, prototype list, processing protocol list, machine tool group responsible for the process progress and quality of prototype model; The manual personnel is responsible for the appearance and precision dimensions of the prototype parts, the surface treatment group is responsible for the surface processing, and the structural personnel are responsible for assembling according to the design intention after the processing is completed. QC is responsible for the acceptance of hand panel parts (according to the standard acceptance of the design drawings, provide quality inspection report form). Each post division detail, forms the high efficiency production line.
In the actual production of prototype, the experience and skill of the craftsman plays a vital role. It can be finally completed by testing the mold to confirm the rationality of the design, and by repeatedly testing and modifying the prototype. The quality of the prototype is mainly controlled in the various process posts, once scrapped can only be done again, this will seriously delay the delivery of products, so, experienced prototype master can reduce the scrap rate, Speed up the processing speed and guarantee the quality of the high-quality prototype, as far as possible to achieve 100% qualified rate, zero scrap, to ensure timely delivery and can hand over to the satisfaction of the customer prototype.

If you want to know more about uv abs plastic rapid prototype parts and rapid prototypes with painting and silkscreen . please email below.
steven@smilecnc-china.com (our sales manager)

