Aluminum Cnc Milling Machining

Feb 22, 2019

Leave a message

  Sand blasting is strictly a kind of dermatoglyph, which can be divided into concave and convex effects. The prototype mold sand blasting is also driven by compressed air to form a high speed jet beam to spray the materials (copper ore, quartz sand, Emery, iron sand, sea sand) to the surface of the workpiece to change the appearance or shape of the workpiece surface. Due to the impact and cutting action of the abrasive opponent's workpiece surface, the surface of the prototype workpiece can obtain a certain degree of cleanliness and different roughness, and the mechanical properties of the prototype workpiece surface are improved, so the fatigue resistance of the prototype workpiece is improved. It increases the adhesion between the coating and the coating, prolongs the durability of the coating, and is conducive to the flattening and decoration of the coating.

According to the different sandblasting methods, there are four relative classification methods:

1. Pressure-in and inhaled sandblasting

2. dry and liquid sandblasting

3.  open sand blasting and box (room) sandblasting

4. manual and automatic sandblasting

Application of Sand blasting on Mould prototype

1. Sand blasting can remove all dirt such as rust on the surface of the prototype workpiece and establish a very important basic schema (commonly known as the wool surface) on the workpiece surface, and can be changed by changing abrasive materials of different sizes. To achieve varying degrees of roughness, the workpiece coated, the work piece before bonding needs to be sandblasting. The binding force of prototype workpiece and coating and plating material is greatly improved. Or make adhesive parts more solid, better quality.

2.  The surface of cast forgings, the cleaning and polishing of workpieces after heat treatment can clean up the cast forgings, all the dirt on the surface of the workpieces after heat treatment (such as oxidation, oil and other residues) can be cleaned, and the finish of the workpiece can be improved by polishing the workpiece surface. Achieve the function of beautifying and decorating.

3. The machined parts' burr cleaning and surface beautification can clean up the tiny burr on the workpiece surface, and make the workpiece surface more smooth, eliminate the harm of burr, and improve the grade of workpiece.

4.  The mechanical properties of the parts are improved. After sandblasting, the mechanical parts can produce even and fine concave and convex surfaces on the surface of the parts, so that the lubricating oil can be stored, so that the lubricating conditions can be improved, and the noise can be reduced to increase the service life of the machinery.

5. For some special purpose workpieces, sandblasting can achieve different reflectance or subgloss at will.

aluminum alloy cnc turning product

If you want to know more about cnc alu rapid prototype and auto parts prototype model . please email below.

steven@smilecnc-china.com (our sales manager)

Send Inquiry