SMILE RP (HONGKONG) LIMITED
SHENZHEN WANBOXIN PRECISION MODEL LIMITED
Steven Song (Oversea Market Manager)
Mobile(Wechat): 0086 18620348301
Tel: 0086 755 27284598
Fax: 0086 755 27284590
Address: 2/F, Build K, intelligent industrial park Of Oceania, Songgang, Baoan, Shenzhen, China, 518105.
The prototype is the first step to verify the feasibility of the product. It is the most direct and effective way to find out the defect, deficiency, malpractice of the design product, so as to improve the defect. Until it is not possible to identify deficiencies from individual prototype models. At this point, there is usually a small-batch trial production to find out the lack of batch to improve. The product that the design completes can not achieve very perfect, even cannot use generally, direct production once have defect will be all scrapped, waste manpower and material resources and time greatly; The hand board is usually a few samples, short production cycle, less manpower and material resources, quickly find out the lack of product design and then improve, and provide sufficient basis for product stereotyping and mass production. 3D printing and CNC manufacturing prototype naturally do not need a mold, This is undoubtedly the ideal way to make a hand board.
The role of hand boards:
1.Make the design of the product more intuitive in front of the designer, easy to find the shortcomings and defects in the design, extend the designer's imagination;
2.Facilitate engineers to discover engineering and process problems in product structure, propose solutions and optimize product structure and functions;
3.The open template can also be used as a reference for the production of the product mould, making the mould manufacturing more accurate, faster, shorter development cycle, and winning the first opportunity for the product to seize the market.
4.Can be used as exhibition, trade fair physical exhibits, save enterprise development costs.
The purpose of making a hand board:
The first is to verify the accuracy of product design, see whether the product is in line with the design concept, reduce the difficulty of product assembly, adjust the drawing, and thus reduce the risk of direct mold opening. The second is to make products directly through the form of prototypes, take them to exhibitors or sales, thus greatly reducing the time for the products to go on the market, because if a set of products open a mold, it takes at least 20 days, and the prototype can be completed only in 3-5 days.
If you want to know more about plastic case cnc prototype cost and cheap cnc prototyping plastic molding. please email firstname.lastname@example.org (our sales manager)